BETE UltiMist® series

Product specifications

Characteristics			Testmethode
Spray angles		90°
Flowrates (l/min)		2.5 to 32
Connection types		Pipe (1/8,1/4) Connection methods: Thread (NPT, BSP, Male, Female)
Materials		Brass / 416, Polyacetal

Product description

The BETE UltiMist® UM series is completely in plastic (polyacetal) with a 1/8" male thread connection. The nebulizer produces a large number of drops below 60 microns. Nebulizers create a very fine mist or fog. Droplets are typically small enough that their buoyancy is significant compared to gravity, allowing droplets to appear to float. In the absence of upward airflow, particles are simply falling very slowly.

Spray pattern

Very fine mist
Large part of droplets below 60 micron

Application

Humidification

Flow rate

2.5 l/min to approx. 32 l/min

Spray angle

90° hollow cone

Materials

Brass / 416, Polyacetate

Connection type

Pipe (1/8,1/4)
Connection methods: Thread (NPT, BSP, Male, Female)

Flow rates in the table are in liters per minute, at the stated pressure difference in bar (density: 1 SG)

Productname	Connection dimensions	Flow Rate (3 bar)	Flow Rate (7 bar)	Flow Rate (35 bar)	Flow Rate (70 bar)	Flow Rate (85 bar)

UM 37	Pipe:1/81/4	0.0246	0.0376	0.084	0.119	0.131
UM 50	Pipe:1/8,1/4	0.0329	0.0503	0.112	0.159	0.175
UM 63	Pipe:1/8	0.0416	0.0635	0.142
UM 75	Pipe:1/8,1/4	0.0495	0.0757	0.169	0.239	0.264
UM 100	Pipe:1/8,1/4	0.0658	0.101	0.225	0.318	0.35
UM 126	Pipe:1/8	0.0833	0.127	0.285
UM 150	Pipe:1/8,1/4	0.0986	0.151	0.337	0.476	0.525
UM 170	Pipe:1/8	0.112	0.172	0.384
UM 200	Pipe:1/8,1/4	0.131	0.201	0.449	0.635	0.7
UM 250	Pipe:1/8,1/4	0.164	0.251	0.561	0.794	0.875
UM 300	Pipe:1/8,1/4	0.197	0.302	0.674	0.954	1.05